DJ Scratch Records

How to use

If you want to be a DJ can you should have mastered the art of scratching. The skilled DJs to produce a better sound quality on the discs from scratches. So, DJ Scratch Records play an important role in the overall performance of the DJ. The quality of the DJ Scratch Records depends on the quality of scratches. Although, there is no hard and fast rule about the procedure of scratching, but the process requires some skills in the booth.

Scratching Skills:

Try to access or which hand you should use for what purpose. With one hand to control the movement of the record scratch DJ and the other to move the cross-fader. You will not find a set of rules for this, you can also do it your way. But most DJs prefer to do this procedure. Your style will dictate your quality of scratches.

o Do not touch the record DJ Scratch if your hands are dirty. Always keep your hands clean while scratching records. Push the center of the disc. While you are exerting pressure at the center, you get a better grip to handle the whole thing. You can also keep on board, if you are not comfortable.

When it scratches or practical, try to use special discs DJ Scratch. Although you are free to use any type of record, but using special Scratch Records at the time of practice will help you learn the technique of scratching better and faster.

• While you are trying to learn scratches, zero faster as well as slower. Do not scratch with the same rhythm. If you try alternating fast and slow movement, which will help you to take note of changes in the process of scratch.

Initially, do not use or fader. Scratch with their hands only.

First scratch or slowly. Then increase the speed gradually. As has been able to scratch at a higher speed, you can experiment with the rhythm of your scratch by combining them with the beats they generate.

o If the central hole of the vinyl is extraordinarily large, it may result from side to side vibrations. A small hole in the central limit the free movement of vinyl records. Then, tighten and loosen as per requirement. If the hole is too small to expand the use of sandpaper. And if the hole is too large, reducing it by the addition of a layer of adhesive tape .......